Using Schwarzkopf got2b Metallics is simple. You mix, apply, wait, and rinse to get a shiny metallic hair color at home.
Start by putting on the gloves that come in the box. Squeeze the color cream into the developer bottle, then close it and shake well until it’s fully mixed. Your hair should be dry and unwashed before you begin.
Next, apply the mixture evenly from roots to ends. If it’s your first time coloring, cover all your hair. If you are touching up, focus on the roots first, then spread the rest through your hair. Make sure every strand is coated so the color looks even.
Leave the color on for about 20 to 30 minutes. Check the instructions in your box, since timing can change a bit depending on the shade.
After that, rinse your hair with warm water until the water runs clear. Apply the conditioner included in the box, leave it for a few minutes, then rinse again.
Dry and style your hair as usual. You should see a cool, metallic shine that stands out right away.
What Is Schwarzkopf got2b Metallics Hair Color
When I first picked up a box of Schwarzkopf got2b Metallics, I honestly thought it was just another regular hair dye. But it’s actually a bit different, and that difference shows in how your hair looks after using it. This isn’t your basic flat color. It’s made to give your hair a shiny, almost reflective look that changes a little in different lighting. That’s what people mean when they say “metallic” hair color.
The dye is designed to create cool tones. So instead of warm reds or golden browns, you get shades like silver, smoky purple, steel blue, or ash tones. These colors look more modern and edgy. I remember trying a smoky violet shade once, and under sunlight it looked almost silver, but indoors it had this soft purple shine. That kind of effect is what makes this product stand out.
Another thing I noticed is that the kit comes with everything you need. You usually get the color cream, a developer lotion, gloves, and a conditioner. That conditioner is actually pretty good. My hair felt softer after using it, which surprised me because hair dye usually makes my hair feel dry.
It’s important to know that this dye works best on lighter hair. If your hair is dark, the color may not show up the way you expect. I learned that the hard way. The first time I used it on dark brown hair, the color barely showed. It just looked slightly tinted. Later, I tried it on lighter hair, and wow, the difference was huge. The color popped so much more.
This is a permanent hair dye, which means the color stays for a long time and grows out with your hair. It does fade slowly, but not super fast. You still need to take care of your hair after coloring if you want the shine to last.
So in simple terms, Schwarzkopf got2b Metallics is a home hair dye that gives you bold, shiny, cool-toned color with a unique metallic finish. It’s great if you want something a little different from normal hair colors and don’t mind putting in a bit of effort to get the best result.
What You Need Before You Start
Before I ever open a box of Schwarzkopf got2b Metallics, I always make sure I’ve got everything ready. Trust me, trying to grab things while your hands are covered in hair dye is not fun. I learned that the messy way the first time. I had dye on my hands and suddenly needed a towel, and yeah things got stained real quick.
First, you obviously need the hair dye kit itself. Inside the box, you’ll usually find the color cream, developer lotion, gloves, and a small conditioner. That’s your main setup. But I like to add a few extra things that make the whole process smoother.
One thing I always grab is an old t-shirt. Something you don’t care about. Hair dye can drip, even if you’re careful. I once wore a decent shirt thinking I’d be fine, and now it has a permanent purple stain on the shoulder. Lesson learned.
I also keep an old towel nearby. This helps protect your neck and shoulders, and you can use it during rinsing too. Dark towels are better because they don’t show stains as much.
Another helpful thing is petroleum jelly. I put a thin layer around my hairline, ears, and the back of my neck. This stops the dye from staining your skin. If you skip this, you might end up with weird colored patches on your forehead. It fades, but still not a great look.
Even though the kit doesn’t require it, I like using a mixing bowl and a brush. It gives me more control when applying the dye, especially around the roots. You can use your hands, but a brush helps spread the color more evenly.
A timer is also important. I just use my phone. It’s easy to lose track of time, especially if you’re doing this alone. Leaving the dye on too long or washing it off too early can change the result.
And finally, make sure you have a clean space to work in. I usually stand near a mirror with good lighting. That way, I can see if I missed any spots.
Getting everything ready before you start makes the whole process way less stressful. It feels more organized, and you’re less likely to make mistakes.
How to Prepare Your Hair for Best Results
I used to think you could just grab a box of Schwarzkopf got2b Metallics and start dyeing right away. Turns out, that’s one of the easiest ways to mess things up. A little prep makes a huge difference in how your color turns out.
First thing I always do now is make sure my hair is dry and not freshly washed. This might sound strange, but slightly “dirty” hair actually helps. The natural oils on your scalp protect your skin and help the dye stick better. One time I washed my hair right before coloring, and my scalp felt irritated during the process. Never doing that again.
You also want to skip conditioner before dyeing. Conditioner makes your hair smooth, which sounds good, but it can block the dye from soaking in properly. I learned this after getting uneven color once. Some parts looked great, others looked faded. Not ideal.
Before applying the dye, I take a few minutes to detangle my hair. This step is super simple but really important. If your hair has knots, the dye won’t spread evenly. I usually use a wide-tooth comb and gently work through my hair. It makes applying the color much easier later.
Now, let’s talk about something most people ignore the patch test. I used to skip this step because I thought it’ll be fine. But it’s actually there to check if your skin reacts badly to the product. All you have to do is apply a small amount behind your ear or on your arm and wait about 48 hours. It’s quick, and it can save you from a bad reaction.
Another big thing is your starting hair color. If your hair is very dark, the metallic shades may not show up well. I remember expecting a bright silver tone, but on my dark hair, it barely showed. If you want bold results, you might need to lighten your hair first. Even going a few shades lighter can make a huge difference.
Taking time to prepare your hair might feel like extra work, but it really pays off. Your color will look more even, more vibrant, and just overall better.
Step-by-Step Guide to Applying Schwarzkopf got2b Metallics
When it comes to actually using Schwarzkopf got2b Metallics, this is where things can feel a bit stressful at first. I remember standing in front of the mirror thinking, “Okay don’t mess this up.” But once you follow the steps slowly, it gets way easier.
The first thing you do is mix the color. Inside the kit, you’ll find the color cream and the developer bottle. You usually squeeze the color cream into the developer bottle, close it tightly, and shake it well. I always shake it for a bit longer than I think I need, just to make sure everything is fully blended. If it’s not mixed properly, the color can turn out uneven.
Once it’s mixed, you need to start applying it right away. Don’t let it sit too long. I like to divide my hair into sections before I begin. Nothing fancy, just a few clips to separate front, sides, and back. This makes it way easier to cover every part of your hair.
Then I put on the gloves and start applying from the roots. Roots usually need the most attention, so I focus there first. After that, I work the dye down to the ends. I use my fingers sometimes, but I try to really massage the product into the hair so it spreads evenly.
One mistake I made early on was rushing this step. I thought I was done, but later found patches I missed. Now I take my time and go section by section. It might feel slow, but it’s worth it.
Another thing I do is make sure my hair is fully covered. Not just lightly coated, but really saturated. If your hair is thick, you may need to use more product than you expect. Dry spots can lead to uneven color, and that’s frustrating to fix later.
After everything is applied, I gently massage my hair again just to make sure the dye is spread evenly. Then I tie it up loosely and get ready to wait for the processing time.
It might feel messy and a bit chaotic while you’re doing it, but that’s normal. Once you get used to the process, it becomes much easier and even kind of fun.
How Long to Leave It On and When to Rinse
This part always makes me a little nervous, not gonna lie. Timing really matters when you’re using Schwarzkopf got2b Metallics. Leave it on too short, and the color might look weak. Leave it too long, and you might not get the result you expected.
Most of the time, the instructions say to leave the dye on for about 20 to 30 minutes. That’s the safe range. I usually set a timer on my phone right after I finish applying everything. It helps me relax a bit instead of constantly guessing how much time has passed.
The first time I dyed my hair, I kept checking the mirror every few minutes. It didn’t really help, and I just ended up stressing myself out. Now I just trust the process and let the dye do its job.
If you want a slightly deeper or stronger color, some people leave it on closer to the full 30 minutes. I’ve done that too, especially when I wanted a more noticeable tone. But I always stick close to the recommended time. Going way over isn’t a good idea and doesn’t always make the color better.
While you’re waiting, your hair might feel a bit stiff or sticky. That’s normal. I usually just sit back, scroll on my phone, or clean up a bit while I wait. Nothing fancy.
When the time is up, it’s time to rinse. I head to the sink or shower and start rinsing with lukewarm water. Not hot, not cold. Just comfortable. I keep rinsing until the water runs clear. This part can take a few minutes, so don’t rush it.
After rinsing, I use the conditioner that comes in the box. This step feels really nice because your hair might feel a little dry after coloring. The conditioner helps smooth it out and adds shine. I leave it on for a couple of minutes, then rinse again.
One thing I avoid is using shampoo right away. I made that mistake once, and I feel like it faded the color faster. It’s better to wait at least a day before shampooing.
Getting the timing right and rinsing properly makes a big difference. It helps your color look better and last longer.
Tips to Get the Best Metallic Hair Color Results
Over time, I’ve picked up a few simple tricks that really helped me get better results with Schwarzkopf got2b Metallics. These are the kind of things you don’t always realize until you mess up once or twice. I definitely learned the hard way.
The biggest tip I can give is this lighter hair gives better results. When I first used this dye on darker hair, the color barely showed. It looked dull and kind of hidden. Later, when I tried it on lighter hair, the metallic shine actually showed up. It looked way more vibrant and closer to what was on the box.
Another thing is using enough product. I used to try to stretch the dye to cover all my hair, especially when my hair was longer. Bad idea. Some parts ended up with less color, and it looked uneven. Now I make sure my hair is fully covered and saturated. If your hair is thick or long, you might even need two boxes.
Take your time while applying. I know it’s tempting to rush, especially when your arms start to get tired. But going slow and working in sections helps a lot. I usually split my hair into parts and focus on one area at a time. That way, I don’t miss spots.
I also like to check a small strand during the process sometimes. Just a quick peek to see how the color is developing. It gives me a bit more confidence that things are going the right way.
Another tip is to avoid putting dye over the same spot again and again, especially if that part is already colored. Overlapping too much can make the color look uneven or too dark in some areas.
And here’s a simple one people forget good lighting. The first time I dyed my hair in a dim room, I missed a few sections completely. Now I always stand somewhere bright so I can clearly see what I’m doing.
These little tips may seem small, but together they make a big difference. Your color will look more even, more shiny, and just overall better.
Common Mistakes to Avoid When Using got2b Metallics
I’ve made enough mistakes with Schwarzkopf got2b Metallics to know what not to do. Honestly, most problems people face come from small things that seem harmless at the time. But they can really mess up your final result.
One big mistake is skipping the patch test. I used to ignore it because it felt like a waste of time. But it’s there for a reason. Hair dye has chemicals, and some people can react badly. It only takes a few minutes to apply a small test and wait. It’s way better than dealing with itching or irritation later.
Another common issue is using the dye on very dark hair and expecting bright results. I did this once thinking I’d get a shiny silver tone. Instead, my hair just looked slightly different, almost like nothing changed. If your hair is dark, you may need to lighten it first if you want that bold metallic look.
Not using enough dye is another mistake I made early on. I tried to cover all my hair with one box, even though my hair was thick. The result was patchy and uneven. Some spots looked great, others looked faded. Now I make sure I have enough product to fully coat my hair.
Uneven sectioning is also a problem. If you just apply dye randomly without dividing your hair, you will probably miss areas. I’ve found spots at the back of my head that I completely skipped before. Taking a few minutes to section your hair really helps.
Washing your hair too soon after coloring is another thing to avoid. I once shampooed my hair the same day because I wanted it to feel clean. Big mistake. The color didn’t last as long, and it looked less vibrant. It’s better to wait at least a day before using shampoo.
All these mistakes are easy to avoid once you know about them. A little extra care can save you from uneven color, dull results, or having to redo everything.
Conclusion
Using Schwarzkopf got2b Metallics at home is honestly not as hard as it seems once you understand the steps. I used to feel nervous every time I dyed my hair, worrying I’d mess it up. But after a few tries, I realized it’s really about taking your time and doing the basics right.
If you prepare your hair properly, apply the dye evenly, and follow the timing, you can get really nice results. That shiny, metallic look is totally possible at home. You don’t need a salon if you’re careful and patient.
What helped me the most was learning from small mistakes. Things like rushing, not using enough product, or skipping prep steps made a big difference in how my hair turned out. Once I fixed those, everything improved.
So if you’re thinking about trying it, just go for it. Take it slow, follow the steps, and don’t expect perfection the first time. You’ll get better with each try.
And if you’ve already used it, you probably know how satisfying it feels when the color comes out just right.